RGB Light Bar
RGB Light Bar
This is not your ordinary light bar. It offers the most customizable control offered on the market today. 50,000+ Hours average life span, Instant on/off.
Confirm your RGB Light Bar order
Money Back Guarantee
Remote Control
Control It On The App
Made In USA
X
About us
“In 2017, my wife gave me a light bar for Christmas. I installed it only to discover a horrible whistling noise. Was my light bar defective in some way? No! The whistling had been a huge problem with no real fix. At that moment I built the first prototype with some tape and PVC. Sprayed it black, put a cool bumper sticker on it, and took it for a ride. We effectively killed the whistle." - Gabe Warner
LIGHT BARS FAQ
While it is not the responsibility of AeroLidz to maintain the attachment points of the light bar we do have a method we recommend. We suggest strongly that all light bars be fastened using bolt holes not slots.The upward force of the air can push the light bar out of its mounts when using the slotted section of some mounts. Make sure your attachment bolts are tight before installation of your new AeroLidz and maintain this regularly if you are removing and installing your AeroLidz a lot.
No the AeroLidz is open on both sides and along the entire length of the back. The heat radiates as intended while in use.
In most cases it does all though it was not designed to fix that. The cheap OEM top is the worst. The Premium OEM is better. The tops from Bestop is great they have the most support. The key to fixing wind noise on a soft top is to mount the light as low as possible to get the top of the light below the roof line. This will help keep the wind from directly hitting the soft top. Our brackets are at a good position to prevent that noise.
NO it does reflect some light into the cab and on the hood but not much more than without.
The difference is the width of the light bar. Single rows are very slim with widths of 1.5" to 2" Dual row lights are taller measuring in at 2.8" to 3"
Easy, remove our switch that is provided on the wiring harness. Then tie those wires together and put away. Then take red battery wire on harness to you switch. Take black battery wire to ground.
Single row is between 1.5" and 2" tall. Dual row is 2.8" to 3" tall.
1st rest the controller by pulling the fuse. Then make 100% sure the white wires connecting to the light bar are making contact. If still not working contact us so we can send you a new one.